The vaping device companies have been in a state of cold war with each other for the last couple of years, as they have to constantly fight for customers who have become more picky and demanding of their devices. It’s not so easy to sell an un-serviced Varivat or a POD system without any adjustments. But market mastodons like Smok, Voopoo, Aspire, Eleaf, Hellvape and Vandy Vape know exactly what vapers need. Especially for all the fans of one of the most popular and acclaimed Drag series of devices, Voopoo decided to release a new box mod that meets the requirements of vapers and which implemented the latest developments in the world of vaping. That is why the light saw the Voopoo DRAG 3 TC Kit box mod with the original universal tank that is sure to surprise even experienced vapers.
General information
Voopoo DRAG 3 TC Kit starter kit that consists of a box mod DRAG 3, which runs on two batteries 18650 and controlled by updated chip Gene.Fan 2.0, and a universal atomizer TPP Pod Tank. The design of the new box mod is very similar to the recently released Drag Max, but with minor adjustments, as it is a full-fledged box mod. The functionality and performance of the device is provided by the updated Gene.Fan 2.0 chipset, which will please you with the stability and speed of operation. The new tank is similar to the PnP Tank, but it has much better flavor and bulk. You can buy Voopoo DRAG 3 TC Kit in five colors – Classic, Vintage Brown, Galaxy Blue, Vintage Grey, Marsala.
Complete set .
It can’t be said that the new starter kit is completed non-standard, rather everything is simple and banal, but at the same time the vaper will get everything that is necessary for trouble-free use of the device. In the box the vaper will find:
Drag 3 Mod box mod;
TPP Pod Tank 5,5 ml atomizer;
TPP-DM2 0.2″ Omega vaporizer; ;
TPP-DM1 vaporizer, 0.15 “Omega; ; ;
USB Type-C cable;
User manual.
Drag 3 Mod Box Mod
Hardly anyone would argue that the company’s products Voopoo vaping few interest until the first was released Drag, which (let’s be honest) has made a small revolution in the world vaping. Despite a lot of comments about it, the box mod became a cult, so Voopoo released the Drag 2. Given the fact that progress does not stand still, Drag S, X, Max series sub-mods saw the light, and it was quite logical to expect the appearance of Drag 3, which was presented.
Frankly speaking, I would like to see the new Drag 3 in an updated design, rather than almost copied from Drag Max, although, if you look into it, there is nothing wrong with it, the box-mod is small enough (122*50,25*25 mm) and has good ergonomics.
The body is made in strict accordance with fashion trends metal and eco-leather inserts. The landing pad is small, designed for installation of atomizers with diameter up to 25 mm.
DRAG 3 maximum power is 177 watts (very similar to the 2nd version) and is provided by two traditional 18650 batteries installed under the flip cover with a latch. If necessary, you can charge the batteries with 2A current using the USB Type-C connector located under the +/- buttons.
An important feature of Drag 3 is that it runs under the control of the chipset Gene.Fan 2.0, which is familiar to vapers on Drag Max. The board works steadily, has a response time of 0.001 seconds, and lifts the coil resistance from 0.1 Ohm. The chipset has a very good functionality that will be appreciated by both beginners and experienced vaper, as it has several operating modes – TC (NI200, SS, TI), Super mode, Smart mode, RBA mode.
The device is equipped with a color display with a diagonal of 1.08 inches, where you can find a lot of useful information about the device battery level, power, mode, number and time of puffs, coil resistance, voltage.
TPP Pod Tank Atomizer
Taking into consideration the fact that recently Voopoo has been releasing new devices with POD tanks instead of traditional atomizers, Drag 3 also has a tank of this format. TPP Pod Tank atomizer is a slightly modified familiar to vapers PnP Pod Tank, but designed to use vaporizers of a different format.
The TPP Pod Tank atomizer is a 510 adapter and a removable cartridge that is held in the adapter by magnets. The nice thing about the TPP Pod Tank is that it uses the classic 510-type drip tip which is easy to replace. An important plus of this design is that instead of the TPP Pod Tank you can install one of the many cartridges of the PnP series adapter fits.
The TPP Pod Tank uses special TPP series vaporizers on TPP-DM2 0.2 “Omega mesh; and TPP-DM1 0.15 “Omega;. It’s worth mentioning that the new vaporizers are equipped with enlarged blow hole and use specially designed mesh, so you won’t have any problems with flavor and bulk.
To refill the tank you just need to remove the cartridge held by magnets in the 510 adapter, open the small silicone plug on the bottom and pour 5.5 ml of liquid.
Conclusions and impressions
It may honestly be said that Voopoo DRAG 3 TC Kit will not make such a splash as it was with the first two versions of Drag, and the reason is pretty trivial vape-market is now saturated with a variety of devices, among which you can choose the best device for yourself. But at the same time the device turned out to be very successful, as many of the remarks and requests of vapers were taken into account and finalized. The device will please not only with its modern design, but also with its performance, functionality and versatility.
Advantages and disadvantages
Disadvantages
The landing pad is designed for atomizers not more than 25 mm, otherwise they will hang down;
To fill the tank you must remove the cartridge.
Advantages
The original design;
Interesting colors;
18650 batteries;
Fast charging;
High performance chipset;
Fast board response;
Good functionality;
Colorful informative display;
Ability to use PnP Pod cartridges;
Specially designed vaporizers on mesh;
510th drip tip;
Large cartridge capacity;
Great taste and flavor.