Skip to content
Menu
Vaping in Canada
Vaping in Canada
Review of the Vaptio Tyro Kit

Review of the Vaptio Tyro Kit

Posted on 9 March 202315 April 2025

The battle between DTL and MTL vapers is quite normal these days. In order not to miss a chance and to please everyone, it is most convenient to make a device capable of both, as the guys from Vaptio did with their Tyro Kit

The Tyro Kit is a versatile set of battery pack and atomizer that combines both MTL and DTL puffs.

Kit

Tyro kit

2 renewable vaporizers for both MTL and DTL: 1.6 ohm for MTL and 0.7 ohm for DTL

Usb cable for charging

User manual

Warranty card from the manufacturer

Design

Not much to say about the design of the set. It is a completely unremarkable pipe-mod without any frills. The only control is located right under the tank and has an informative backlight showing the level of the battery charge, and on the opposite side of it is Usb input for charging. The size of the kit allows you to use it as a stealth device.

The atomizer, by the way, is integrated into the body, so I advise to be careful, because you can not change the glass. E-cigarettes online boutique in Canada the top of the tank has an increase in diameter, it does not look good, but will be able to save your device in the fall, because this visor will take the impact. The number of colors is quite decent, so that there should not be unsatisfied.

Technical characteristics of the set

 Dimensions: 122 x 19mm

Weight: unknown

Housing material: stainless steel

Power: Built-in rechargeable battery 1500mAh

Tank Capacity: 2ml

Vaporizer resistance: 0.7 / 1.6 “Omega;

Power output: 10 “mdash; 25W

Working Mode: POWER

Protection: from low / high resistance, from overheating, from short circuit, from overcharge / over-discharge

Connector type: none

Screen/diagonal: none

Micro-USB port/charging: yes, charging current 0.6A

If you use the device with MTL vaporizer, the capacity of 1500 mah should be enough for a whole day, if not more, but when using DTL vaporizer you will be dependent on the socket. In this case and the low price of the device, it is worth thinking about buying a second one if you like it and intend to use it more in DTL mode.

The tank volume of 2 ml is not bad enough for MTL vaporizers, but for DTL it will not be enough, I am afraid that you will fill it as a cloud-chaser vaporizer at contests. The filling is on top and the hole is located under the swivel cap at the top of the atomizer. In my opinion, this system is not really convenient and has long been outdated, you could have tried to make a standard top filling.

There are two types of vaporizers in total and both of them are available in the kit. As everyone could already understand one of them is for clouds, the other is for cigarette puffs. The adjustment is made in a very interesting and quite standard way for such devices. It is regulated by turning the atomizer and has both point (for MTL) and standard (for DTL) adjustments.

 Conclusions

If we talk about the device from MTL standpoint, I have no questions about it, and I could not find any disadvantages, except for the outdated system of filling the tank. But for DTL, in my opinion, the battery and tank volume is not enough. So if you rate the device as a representative of MTL 10 out of 10, but for DTL is more thoughtful device with a large battery and tank at the same price, but without the possibility of MTL vaping.

 Pros and cons:

Pros:

Price

Great MTL device

Great variety of colors

Blowing control system

Great battery life in MTL mode

Cons

Outdated tank filling system

Low battery life in MTL mode

Charging cycle 2.5 hours (charging current 0.6A)

Recent Posts

  • Review of Dovpo MVV II . First Look
  • Review of Screwdriver E-NIC MKII. History of vaping
  • Review of Temon mechanical mod by Metal Madness Vapors
  • Review of POLDIAC mech mod by Metal Madness Vapors. History of vaping
  • Review of Mechanical Mod KAMRY K100. History of Vaping
Vaping in Canada
©2025 Vaping in Canada