A lot of manufacturers lately focus on creating AIO and POD systems, but do not forget about the classic box mods and tanks. Although, to be clear, the devices produced now are very different from those that were in demand a couple of years ago. Manufacturing companies are trying to surprise vapers not only with the original design, but also with the functionality and performance. Smok company is trying to be on the crest of the wave, releasing new devices. Many vapers remember the box mod Mag, made in the form of a pistol handle due to its ergonomics, he came to the taste of users. The company’s specialists decided to continue this series and saw a new starter kit SMOK Mag P3 230W TC Kit with TFV16, which is made in waterproof and shockproof case and has a new chipset.
General Info
SMOK Mag P3 230W TC Kit with TFV16 is a starter kit consisting of well-known vapers atomizer TFV16 with interchangeable vaporizers and updated box mod in a waterproof, shock and dust-proof case with a new chipset. The atomizer is familiar to many vapers as it was released earlier and is a continuation of the TFV series. The box mod is made similar to the previous models, but the design has become more ergonomic and practical. The device is equipped with the new Smart IQ-M Chipset, thanks to which the performance and reliability of the mod was improved significantly, with the functionality that can pleasantly surprise even the most demanding vapers. You can buy SMOK Mag P3 230W TC Kit with TFV16 in five colors: black-red, red-black, gray-black, blue-black and green-black.
Kit
This starter kit is quite traditional in terms of equipment, so the manufacturer has made sure that the vaper does not have to search for consumables. In the branded box the vaper will find:
Mag P3 MOD box mod;
TFV16 Tank atomizer with TFV16 Conical Mesh2ohm coil powered by nexMesh Technology;
TFV16 Dual Mesh 0.12ohm Coil vaporizer;
Replacement Glass;
Protective silicone ring for glass;
Replacement Eringes;
USB cable for charging and firmware update;
User manual.
Appearance and Design
It is worth to say right away that TFV16 Tank Atomizer was released three months ago, and during this time it has already managed to win its market segment with its technical characteristics, taste and bulk. You can read more about the tank here. Of particular interest to vapers is the box mod Mag P3 MOD, which although it resembles the previous version, which has managed to be loved by users, but has a number of significant differences and additions, and for the better.
The first thing worth mentioning is, of course, the appearance of Mag P3 MOD. Traditionally it is made in the form of a pistol grip, which ergonomics will not cause any questions. Alas, there is a disadvantage in this form factor to take the device can only be in one position, and this will not please all vapers.
The new box mod case is made of zinc alloy with carbon fiber panels, which makes Mag P3 looks interesting and stylish. An important feature of the device is that it has a degree of protection IP67 he is not afraid of moisture, dust and small falls (worth repeating this device should not be hit with a hammer or drop it on concrete from the fifth floor will not withstand such effects).
Dimensions of the device is not the smallest, but this is a payment for ergonomics. The mounting area for atomizers is big enough, which allows you to install tanks and drippers with a diameter up to 27 mm. Maximum power of the device is 230 watts, and it is provided by two conventional batteries 18650, which are installed from the end of the mod with a hinged cover with an additional seal.
The batteries can be charged using the micro-USB connector located on the back of the device, current of 1.8A, and the connector is closed by a special silicone cover, which does not allow moisture to enter the device.
The board, functionality and features of use
Box mod Mag P3 Mod though very much resembles its predecessor externally, but at the same time very significantly changed in operation, functionality and performance. First of all, it uses a new IQ-M Chipset, which the manufacturer calls smart. And this is quite justified, as the board is really productive and functional vaper can use the device in varivatte, varivolt or thermocontrol mode. The stated minimum resistance of the device is 0,1 ohm in varivolt mode, but this will hardly upset vapers because 0,05 is used very rarely.
Important feature of the device is a color touch screen diagonal 1.9 inches, with which you can not only monitor the Mag P3 Mod, but also manage it. Among the useful features is the ability to lock the device with a PIN-code.
The unlocking of the screen is done with the Slide-to-Unlock function, which is very convenient and practical. It is worth noting that the operation and configuration of the device is very simple and understandable even to not the most experienced vaper.
Conclusions and impressions
SMOK Mag P3 230W TC Kit with TFV16 is another worthy product from the vape industry flagship that many vapers will enjoy. The use of the new chipset, good functionality, large display, tasty and impressive tank – all this will please the user.
Advantages and disadvantages
Disadvantages
The minimum impedance of 0.1 ohms;
You can comfortably hold the device only in one position.
Advantages
Ergonomic design;
IP67 protection against dust, moisture, shock;
Large landing pad for the tanks;
Performance board;
Large touch screen display;
Easy setup and operation;
Fast charging;
Great taste and aroma from the tank.