The Metal Madness Vapors project, which started with the DID genesis by Jim Damianidis, is unique in its own way. Because it is not a sham production with an inexplicable logic of queue advancement. But a completely serial (albeit small-scale) production of products. Somewhere I even came across a funny comment, like, Jim has filled everyone with his genesis, and where is the joy of waiting while standing in lines… Well, to each his own, we will not argue here.
The genesis by MMV is not ideal. And heavier than it could be made, and the capacity is not the most tempting. But structurally they are still reasonable. Jim is one of the few who knows how to work with threads. vape canada Therefore, on his devices there is no perverted perversion in the form of articulation of elements on o-rings.
But Poldiac, even with my attitude to mechanical mods, commands respect. And even admiration for the implementation of individual solutions. So, let’s get started…
Transport packaging
I would like to emphasize that we are talking about packaging for transportation. Because Metal Madness Vapors products are sent from warm Greece to various corners of our beautiful planet. For the first time, they started sending fragile transparent flasks for Genesis devices this way (I mentioned this in my review). Now, all the parts of large-sized devices are packed in the “branded” way.
This is exactly the set of “wooden pieces” you see when you open a parcel from the Greeks. By the way, they now send via UPS, so it’s faster to arrive.
The Poldiac itself is also hidden in a fabric case to preserve its beauty. It’s not necessary to use it, but they still care about their customers.
The reason is simple. I ordered the Poldiac RW edition for myself. This version is extremely beautiful, but unbearably shiny. Photographing it is a real hassle (the need to avoid reflections and glare is too stressful).
Main elements
How many elements does a mech mod usually consist of? That’s right, three. “Head”/upper part with a connector (well, and the button can be on top). Glass/battery compartment. Bottom cover (with or without a button).
Mech mod POLDIAC by Metal Madness Vapors. History of vaping – main elements
But in Poldiac there is one more of these elements. Let’s see:
The thing is that the device is equipped with a composite glass. It is the one that “disassembles” into two parts. The inner part (narrower) connects the elements of the device (the “head” and the bottom cover are attached to it). The outer part acts as a decorative element.
There may be several reasons for such a technical solution. Starting with the ability to “change” decorative parts (this is what distinguishes the various versions/”editions” of Poldiac). And ending with the ability to use a “lightweight version”, when the device is assembled without the outer part of the glass. It looks funny, but you can use it.
Note that the outer diameter of the assembled device (along the outer glass) is 22.6 mm. It would be possible to make the walls solid, but for 18XXX batteries they would be too thick.
UPD: I reread while editing and noticed that I did not indicate the length and weight of the device anywhere. I am correcting myself. Let it be in this place. The measurements were taken for the polished and satin versions for the 18650 battery. The length of the assembled device: 105.4 mm. Weight: 120 g (satin version) / 122 g (polished).
When studying the device, I even wanted to write to the manufacturer and ask why the device itself is so “thick”, and also inquire about the double glass… Then I thought better of it, because idle curiosity ruins not only cats, but also small dogs. And when I looked more closely at the design of the “head” with a magnetic button (yes, magnetic), it became clear that the dimensions of the product are also determined by this technical solution.
In addition, evaporators with an outer diameter of 22 mm also need to be vaporized on something. So the question about the dimensions was removed from the agenda.
Conclusions and recommendations
My personal opinion is another “credit” to this manufacturer. At the end of the review, Temon already praised Metal Madness Vapors, I will not repeat myself.
The “disadvantage” for users from the CIS is the price, which is understandable. Naturally, I would like it to be cheaper, but the manufacturer is in the European Union, so why should its products be cheap? It is clear that there is a simple solution. Do not buy various junk, but save up some money and get a quality device for use. But this is obvious not to everyone, and it is a pity.
By the way, the popularity of Metal Madness Vapors products among foreign users is determined, among other things, by the fact that by their standards it is not too expensive. Well, that’s it. That’s it, thank you for your attention. Please forgive me for the many letters again. Well, and for the photos too.
P.S.: I will continue to look at the righteous works of the participants of the Metal Madness Vapors project. If something new and funny appears, I will try to tell you. This is a manufacturer whose review of devices is not a pity to spend effort and time.