This article will focus on a non-standard device consisting of a pipe mod and a disposable tank Kirin MTL Pod Kit from KIZOKU.
The manufacturer KIZOKU, whose roots go back to the famous Chinese online store HeavenGifts, may be familiar to readers for a rather curious thing in the form of a set of stands for atomizers Cell Atty Stand. Apart from this accessory, which is useful for any vaper, this brand, perhaps, has not distinguished itself with anything remarkable, however, until recently. Our today’s novelty in the form of a pipe mod and a hybrid of a maintenance-free tank with a “pod” will definitely bring a few points to the fame of KIZOKU.
As already mentioned above, the Kirin MTL Pod Kit consists of a mechanical mod with a small board and a maintenance-free tank of the same name. canadian vape shop ottawa The diameter of the BB is 24 mm, while the cleric has very modest dimensions, and its diameter at the landing is only 21.5 mm.
The tube mod is almost entirely made of stainless steel and is available for purchase in three colors: steel, brass and black. The minimum height of the device is at 50 mm, which is perfect for creating a stealth bundle. A distinctive feature of the Kirin Tube Mech Mod is the presence of a simple control chip inside, similar to what we could see in the recently released Cthulhu Tube Mod. There is also a separate Fire button almost the entire length of the tube.
One replaceable battery will be responsible for the operation of the tube mod, the format of which can be either 18350 or a more capacious and productive 18650. Compatibility with the latter is achieved by a banal threaded tube extension, on which the battery compartment cover is also held, by the way.
The Kirin Tube Mech Mod connector is not a hybrid, but the atomizer is connected to the mod directly through the contact of the tiny board mentioned above, visible from the 510 hole.
As for the Kirin MTL Disposable Tank atomizer, it is made of stainless steel and PCTG plastic, and structurally consists of three elements: a deck, a tank, and a 510 drip tip. By the way, the deck has a blower adjustment ring, allowing the user to adjust both cigarette and free puffs.
A non-replaceable evaporator is integrated into the plastic part of the device, the resistance of which, depending on the desired type of puff, can be 0.5Ω or 1.2Ω. For filling the tank, there is a hole under the silicone plug in its lower part, and the device can hold up to 2 ml of liquid.
KIZOKU Kirin MTL Pod Kit Specifications:
Mod dimensions: 50mm*24mm
Material: SS
Connector: 510
Working resistance: 0.2-3.0Ω
Output voltage: 3.5V
Power supply: 18350/18650
Tank dimensions: 41.6mm*21.5mm
Material: SS + PCTG
Capacity: 2ml
Evaporators: 0.5Ω, 1.2Ω