Eleaf is known worldwide for their iStick series of affordable boxmods, which already counts more than 15 devices. The last of them was their iStick 200w, which logically completed the already huge lineup. This time Eleaf has released a brand new box mod called iPower 80W. Let’s see what contribution it will make to the development of the vaping industry.
The design does not resemble the iStick at all. Designers have done a very good job and” made it quite solid. Particular attention is drawn to the controls, which, in addition to the standard controls, include reset and menu buttons.
The device is available in” standard colors, on the” background of which stands out brown and” wooden. But it is not” real wood, but” only paint, which has the property to wear off, so it” will quickly lose its good look.
The size of the box mod is not” particularly large: 85.5 “times;49.5 “times;23.5 mm, it will perfectly fit atomizers with a diameter up to 23.5 mm, and 24 mm too. Usb port for charging and” firmware update is located on the” bottom edge of the box mod, which is not” always convenient. But” this is not” the worst option, some manufacturers like to place it on the” side edge under the connector.
Eleaf box mods cover all types of devices at once. They decided to refer the new product to” box mods of medium power. canadian vape shop calgary The maximum power stopped at” the mark of” 80 W. The minimum resistance of the atomizer 0.1 ohm, in” thermocontrol mode 0.05 ohm at a temperature of 200-600 F or 90-315.5 C. Works box mod in” the following modes: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3). Firmware, as I” already said above, updated.
By the way, the board is completely redesigned. Changes touched both visual and technical component of the firmware. The Smart mode of the board is very interesting, but I have too little information to tell you about it.
The size of the box mod is not” particularly large: 85.5 “times;49.5 “times;23.5 mm, it will perfectly fit atomizers with a diameter up to 23.5 mm, and 24 mm too. Usb port for charging and” firmware update is located on the” bottom edge of the box mod, which is not” always convenient. But” this is not” the worst option, some manufacturers like to place it on the” side edge under the connector.
Eleaf box mods cover all types of devices at once. They decided to refer the new product to” box mods of medium power. The maximum power stopped at” the mark of” 80 W. The minimum resistance of the atomizer 0.1 ohm, in” thermocontrol mode 0.05 ohm at a temperature of 200-600 F or 90-315.5 C. Works box mod in” the following modes: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3). Firmware, as I” already said above, updated.
By the way, the board is completely redesigned. Changes touched both visual and technical component of the firmware. The Smart mode of the board is very interesting.