Eleaf is known all over the world for their line of affordable iStick series box mods, which already counts more than 15 devices. The last of them was their iStick 200w, which logically completed the already huge lineup. This time Eleaf has released a brand new box mod called iPower 80W. Let’s see what contribution it will make to the development of the vaping industry.
The design does not resemble the iStick at all. Designers have done a very good job and” made it quite solid. Particular attention is drawn to the controls, which, in addition to the standard controls, include reset and menu buttons.
The device is available in” standard colors, on” the background of which stands out brown and” wooden. But this is not” real wood, but” just a paint, which has the property to rub off, so it” will quickly lose a good look.
The size of the box mod is not particularly large: 85.5 “times;49.5 “times;23.5 mm, on” it perfectly fit atomizers up to 23.5 mm in diameter, and 24 mm too. Usb port for charging and” firmware update is located on the” bottom edge of the box mod, which is not” always convenient. canadian vape shop edmonton But” this is not” the worst option, some manufacturers like to place it on the” side edge under the connector.
Eleaf box mods cover all types of devices at once. They decided to classify this new product as a medium-power box mod. The maximum power stopped at” the mark of” 80 W. The minimum resistance of the atomizer 0.1 ohm, in” thermocontrol mode 0.05 ohm at a temperature of 200-600 F or 90-315.5 C. Works box mod in the following modes: VW/Bypass/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3). Firmware, as I” already said above, updated.
By the way, the board is completely redesigned. Changes touched both visual and technical component of the firmware. The Smart mode of the board is very interesting, but so far we have too little information to tell you about it.
Eleaf has extensive experience in” using non-removable batteries, which is not good. After all, they decided to use it again in the new product. The claimed capacity of the battery is 5000 mah,
In the upper part of the body there is a 510 steel connector with” kerfs for bottom blowing. To be honest, it’s been a long time since I’ve seen an atomizer that could use it.
Eleaf wanted to try their hand at something new and they did it quite well. The box mod is completely different from its predecessors and that’s good. Most likely the mod will become popular, because with a maximum power of 80 W and a 5 Ah battery, the box mod can show good autonomy and does not require additional spending on batteries and charger.