General information and design
CoilART have always been known for the affordability of their devices. This one is no exception and at a very low price it has quite good functionality and a mesmerizing appearance. At first glance, you can’t say that a device with such a design is so inexpensive.
The case is made of zinc and aluminum alloy and decorated with a nice engraving on the sides. All the controls, namely the Fire button, LED indicators of the charge level and power mode and the button to change the varivolta mode, are located on the front side of the device.
In the upper part there is a 2 ml cartridge, which is made of matte plastic, and a delrin driptip, which is responsible for adjusting the airflow.
Five color options are available and they all look great!
Accessories
1 BRON mod
1 BRON Pod cartridge (0.5ohm SS DTL Coil)
1 Driptip
1 MicroUSB cable
1 Instruction manual
Cartridges are sold without a drip tip! online vape shop canada Do not throw away the driptip when replacing the cartridge!!!
Quite a standard package and for the price tag for which the device is sold it would be silly to ask for a second cartridge option with a vaporizer for MTL puff 1.0ohm SS MTL Coil, but still I would slightly overpay to try both options.
Specifications
” BRON mod battery pack
Size 62 x 36 x 13mm
Built-in 900mAh battery
Maximum power output: 25W
3 modes of operation 0.5ohm vaporizer: 3.3V, 3.5V, 3.7V
3 modes of operation 1.0ohm vaporizer: 2.9V, 3.5V, 3.7V
Zinc and aluminum alloy body material
One button operation
LED charge level indicator
One adjustable blow hole on the driptip
10 second cutoff
Protection against short circuit, low voltage.
The size of the device is quite compact and despite the fact that it does not have ergonomic shapes, all the side edges are beveled and the device should lie quite comfortably in your hand.
The battery capacity as for a sub-system is quite standard and acceptable. The device is charged using the USB connector at the bottom of the device, the charge current is unknown. If you use a 1.0 ohm vaporizer you will not have any problems with autonomy during the day, but with a 0.5 ohm vaporizer you will most likely have problems and will have to charge somewhere during the day.
Under each vaporizer Bron mod has its own varivolt presets, which are changed with the help of a button at the very bottom of the front panel. Also the change of modes is accompanied by a change in the number of burning LED indicators.
The power of the device supplies no more than 25 W, which for sub-systems is quite good and even above average. You should not expect a huge amount of vapor, but the device is not designed for clouds, no matter how it is a subsystem.
BRON pod cartridge
Resistance: 0.5ohm / 1.0ohm
Spiral material: 316 stainless steel
Cartridge volume 2ml
5ohm SS DTL under DTL blowing
0ohm SS MTL for MTL blowing
Side filling with silicone plug
There are two variants of cartridges with built-in vaporizers, for 0.5 and 1.0 ohm. The first one is designed for nicotine-free liquids and moderate amount of clouds when using DTL blowing. The second one is designed for MTL puffing and using liquids with high salt nicotine content. Of course, no one forbids you to use liquids with nicotine with the first variant of vaporizer. Both vaporizers use 316 stainless steel as vaporizing element, which is famous for its durability.
The volume of the cartridge is 2 ml, refilling is generally more than convenient, and the hole is located under the silicone plug on the side edge. It is quite standard and many people have long become accustomed to this system.
Blowing is regulated by turning the adjustment ring at the bottom of the driptip.
Conclusions and impressions
Despite the fact that the device allows both MTL and DTL blowing, which is undeniably good, I consider DTL blowing unnecessary, as the sub-system is invented for liquids with high nicotine content to satisfy smokers’ addiction and it copes with this task perfectly. The conclusion is, what is the point of supplying a sub-system kit with a vaporizer not for cigarette puffing?
Advantages and disadvantages
Disadvantages
Having a vaporizer under the MTL would have been much nicer
Advantages
Design
Price
Minimal controls and ease of use