Statistically speaking, many vapers are former smokers, so for them the important thing is not only nicotine saturation, but also the process of puffing. That’s why fans of tight cigarette puff are not as few as you might think. And manufacturers, knowing this, regularly replenish their assortment with various devices designed for MTL-puffing. And there is an interesting feature manufacturers produce not only tanks or droppers with a tight cigarette puff, but also mods to them. One of the brightest examples of this is CoilART company, which recently presented its variant of such a kit – BLAZAR MTL kit, which definitely deserves the attention of cigarette puff lovers. The mod used in this kit reminds a bit of Cthulhu Tube” from the Chinese company” Cthulhu Mod”, but it is made in a more original design, and the tank is practically a classic cigarette puffer, which is unlikely to have any complaints and questions from vapers.
General Information
CoilART BLAZAR MTL kit is a starter kit consisting of an 18350 battery-powered pipe mod and a single coil Blazar RTA atomizer for a full-blown, tight cigarette puff. Although the pipe mod has not the most popular battery format, it is made in a traditional design for pipe mods, using stainless steel and resin-plastic. online vaping shop in canada The device is equipped with a minimal set of protections, but it works perfectly with a complete tank Blazar RTA, which can be safely attributed to a full-fledged cigarettes on one coil with adjustable point blowing. Buy CoilART BLAZAR MTL kit can be purchased in five versions black, steel, yellow resin, green resin and purple resin.
Bundling
We can’t say that the new starter kit is packed in some unusual way, in the branded box you can find a traditional kit for the full use of the device:
BLAZAR mod tube mod;
Blazar RTA atomizer;
Spare glass;
Spare screws;
Spare orings;
Screwdriver;
Warranty card;
User’s Manual.
BLAZAR mod
If you look at BLAZAR mod, many vapers will remember the recent creation of Cthulhu Mod from the same name company, as the devices have many similarities in appearance. But this does not mean that Blazar is a copy of Cthulhu Mod, just the opposite, it is made in a distinctive and original design. Thanks to the use of stainless steel and resin drains the device looks very decent, original and interesting, and fans of classic strict colors can use the steel or black version.
The diameter of BLAZAR mod is 24 mm, so you can install not only the complete atomizer, but also any other atomizer depending on the vaper’s preferences. The landing pad, of course, is steel, with an engraving in the form of an eight-pointed star, which prevents the atomizer from sticking.
The device is able to supply 3-4.2 volts to the atomizer coil, and this is provided by a battery 18350 format is not so usual for many vapers, but it is in demand, especially in such compact devices as BLAZAR mod. The battery is installed from the bottom end, where the screw-in plug is located.
BLAZAR mod is quite a simple device equipped with a standard set of protections – from low/high resistance, from overheating, from short circuit, from incorrect polarity. The control is realized by a single small fire button located in the center of the device.
Blazar RTA atomizer
It should be said right away that the Blazar RTA atomizer is a rather interesting tank designed for a tight cigarette puff. We cannot say that this tank is revolutionary or innovative, rather, it is quite a good cigarette puffer, which can be used on any box mod. At the same time, the vaper will get a classically designed tank, made in a rather strict style without any additional decoration or embellishments.
The Blazar RTA has the same diameter as the 24 mm pipe mod, which makes it quite popular and interesting. The tank is equipped with a two-piece 510-m stainless steel and Ultem drip tip, which will not be difficult to replace with any other from your collection. It is worth noting that the volume of the tank is 4 ml, which is not a bad figure for a cigarette vaporizer.
The base in Blazar RTA is quite standard, it is two posts, offset from the center, in which the spiral is installed horizontally, with vertical fixation with two hexagonal screws. Installing the coil and laying the vapor will not cause any difficulties, everything is simple, clear and familiar.
When it comes to the airflow of this tank, the airflow hole is located directly under the coil, so the flavor transfer will be at a good level. Adjustment of the airflow is made by turning the ring with notches, which opens one of the six holes of different diameters, so the vaper will be able to choose the best option for himself.
Filling the atomizer is made no less simple just slide the top cover in a straight line, after which you can pour liquid into the tank, and the hole is equipped with a simple check valve, which is a kind of protection against children and leaks.
Conclusions and impressions
CoilART BLAZAR MTL kit is a really interesting starter kit, which will be perfect for fans of tight cigarette puff and stealth devices. Regardless of whether a vaper will use this kit in combination or separately, he will get good and productive devices that allow to get a full MTL puff and good autonomy.
Advantages and disadvantages
Disadvantages
Very small fire button;
No ability to set the operating voltage.
Advantages
Compact size;
Original colors;
Easy operation and maintenance;
Diameter 24 mm;
Easy to use tank;
Convenient refilling;
Full MTL draw;
Easy coil installation and vapor placement;
Good flavor.