Skip to content
Menu
Vaping in Canada
Vaping in Canada
Review of Brusko Vilter Pod Kit

Review of Brusko Vilter Pod Kit

Posted on 14 September 202315 April 2025

The number of vapers who prefer to vaporize salt nicotine based liquids is steadily growing. This interest is explained by the fact that when vaping such liquids you can literally in a few puffs satisfy your nicotine hunger without getting a hard TX, which is inevitable when using strong liquids based on freebase nicotine. Naturally, to vaporize such liquids based on saline nicotine you need to buy a POD-system beforehand. Do not think that only Chinese manufacturers can produce closed-type systems, as a fairly well-known Russian company Brusko (surely many vapers have met and enjoyed vaping liquids from this manufacturer) began to mass produce POD-systems together with the Chinese Aspire. And one of the new products can be considered Brusko Vilter Pod Kit, which will definitely please fans of tight puffs and strong liquids.

General Information

Brusko Vilter Pod Kit is a compact POD system equipped with a medium capacity battery, designed to use replaceable cartridges with built-in vaporizers for vaping salt nicotine liquids. canadian vape shop calgary The device is made in the form of a small stick with a plastic drip-type, which can be replaced by a paper, resembling a cigarette filter, and the device is not only compact, but also very light due to the use of aluminum alloy. The POD system is easy to use and maintain, activates on puff and charges quickly. A replaceable cartridge with a built-in vaporizer on a 1ohm grid will allow you to get good flavor and tight MTL puff. Brusko Vilter Pod Kit is available in eight colors black, gray, blue, gold, pink, green orange and red.

Equipment

It makes sense that this POD system is completed quite simply, but at the same time, the manufacturer was able to please with a somewhat unconventional approach, so the vaper will find in the box:

Vilter Pod Battery pack;

Vilter Pod 1.0 ohm cartridge;

A USB Type-C cable;

Two paper mouthpieces;

User’s Manual.

Vilter Pod Battery

The Russian vaping market is rightfully considered one of the most attractive for manufacturers, as the number of vapers is constantly increasing. In most cases, on the shelves of domestic stores you can find devices of Chinese origin, because it is in China today concentrated all the production of electronic cigarettes. But not so long ago, known to many vapers for its high-quality liquids company Brusko began to produce together with the no less famous manufacturer Aspire their version of POD-systems. And one of such systems is Brusko Vilter Pod Kit, which will surely become an everyday device for many vapers.

Brusko Vilter Pod Kit looks very neat, to some extent even strict, as the device is made in the form of a small stick with a mouthpiece. The designers of the company did not decorate the device, so it has only the company’s logo and brief technical information. The device is not only small 95*22 mm, but also lightweight, it weighs only 31 grams due to the use of aluminum and plastic.

This POD system is powered by a built-in battery with a capacity of 450 mAh, not much, but don’t forget about the size of the device and the fact that it uses high-resistance vaporizers, although this capacity will be quite enough for autonomous work during the day. The battery is charged using the USB Type-C connector located on the side edge of the device.

Brusko Vilter Pod Kit is equipped with a fairly simple chipset, thanks to which the device has a full set of protections and is designed to work at a power of 10-15 watts. The device is activated by puffing, which is very convenient to take out of your pocket, take a few puffs and put it back.

Vilter Pod cartridge

Considering that the Brusko Vilter Pod Kit is quite a compact device, it works with replaceable cartridges, not replaceable vaporizers. The cartridge is held in the battery pack by magnets.

An interesting feature of the Brusko Vilter Pod Kit cartridge is that it is initially equipped with a plastic round mouthpiece, which can be replaced with a paper one, resembling a cigarette filter. It should be said at once that such replacement will not affect the flavor transfer, but the tactile sensations will be similar to smoking a standard cigarette. Such a solution is not a novelty, but smokers who want to get rid of their addiction, it will be easier to do it thanks to such a mouthpiece.

Brusko Vilter Pod cartridge with a built-in 1.0 ohm grid vaporizer will give you a bright and rich flavor. There is no airflow adjustment, but the manufacturer has initially provided for a tight cigarette puff.

To refill the cartridge, you need to remove it from the battery pack, turn it upside down, open the silicone plug and pour 2 ml of liquid.

Conclusions and impressions

Brusko Vilter Pod Kit is a POD system that will be perfect for both vapers and smokers trying to quit smoking. It features good flavor delivery, ease of use and maintenance, so many vapers will be happy to use it for vaping salt nicotine based liquids.

Advantages and disadvantages

Disadvantages

You have to remove the cartridge from the battery pack to refill;

Not the largest battery capacity.

Advantages

Compact size;

Low weight;

Large selection of colors;

Fast charging;

Vaporizer on the grid;

Interchangeable mouthpieces;

Puff activation.

Recent Posts

  • Review of Dovpo MVV II . First Look
  • Review of Screwdriver E-NIC MKII. History of vaping
  • Review of Temon mechanical mod by Metal Madness Vapors
  • Review of POLDIAC mech mod by Metal Madness Vapors. History of vaping
  • Review of Mechanical Mod KAMRY K100. History of Vaping
Vaping in Canada
©2025 Vaping in Canada