Skip to content
Menu
Vaping in Canada
Vaping in Canada
Review of eVic VTwo by Joyetech - Updated.

Review of eVic VTwo by Joyetech – Updated.

Posted on 17 January 202415 April 2025

The eVic VT was considered the best boxmod in its category for a long time, but Joyetech soon released their eVic VTC mini, thus simply destroying their past creation, it became useless and forgotten. But now, a year has passed and Joyetech decided to update their old man and increase his technical characteristics, meet eVic VTwo.

eVic VTwo by Joyetech

The first thing that attracted the attention of eVic VT was its design. That’s why Joyetech practically didn’t change it a bit and left everything in its place. The only significant change affected the chrome controls, now they are black. Instead of the usual + and still remains a wheel, which did not like not everyone, but I liked this solution. canadian vaping The dimensions of the boxmod are as follows: height 85.6 mm, width 47 mm, and its thickness is 25.5 mm and will allow you to use most atomizers. The number of color options has increased significantly, but personally I would only be interested in the three far right ones:

eVic VTwo by Joyetech

The TTX of the board has been tightened up considerably. The maximum power now stops at 80W, the minimum resistance of the atomizer is 0.15 ohm, in TC mode 0.05 ohm with a limit of 200-800 F or 93-315.5 C. New modes of boxmod operation have been added, now they include: RTC/VW/VT (Ti, Ni, SS316)/Bypass/TCR (M1, M2, M3). The possibility of firmware upgrade was not left out either.

The updated version of the boxmod still has a non-removable battery of 5000 mah, which is in turn the average capacity of two batteries 18650, and with a maximum power of 80 W autonomy boxmod just gorgeous, a day enough for sure. Yes, and vaporize is likely to be possible during charging. Also in all new boxmods of the company uses a large display 0.96 inch, but that’s not all. Firmware customization is still present, but Flappy bird, which has long been a built-in game in Joytech products is not here, due to the lack of necessary controls. The price of the device is approximately 45-50 dollars, as there is a set, which additionally includes CUBIS Pro, the price of such a set I could not find, but the tank separately costs about 15-20 dollars, from which we can conclude that such a starter kit will cost you about 55-60 dollars.

Recent Posts

  • Review of Dovpo MVV II . First Look
  • Review of Screwdriver E-NIC MKII. History of vaping
  • Review of Temon mechanical mod by Metal Madness Vapors
  • Review of POLDIAC mech mod by Metal Madness Vapors. History of vaping
  • Review of Mechanical Mod KAMRY K100. History of Vaping
Vaping in Canada
©2025 Vaping in Canada